How to Disable Driver Signature Enforcement Windows 7/8/10 64Bit



How to Disable Driver Signature Enforcement In Windows 7/8/10 64-Bit

Some time in the past I once wrote a submit approximately the way to Install Xiaomi Android USB Driver, however there's a problem with the Driver on Windows 7/8/10 64-Bit so should use a unique manner to do the set up in order that Xiaomi device may be detected in EDL or Fastboot Mode. Caused because Driver from Xiaomi is Unsigned. (Read also: How to Enter EDL (Emergency Download) Mode Xiaomi Devices)

In this post I created a "Disable Driver Signature Enforcement" for Xiaomi Android USB Driver installation on Windows 7, 8 / 8.1, and 10 and helped Xiaomi customers to Flashing their Xiaomi devices. Do it little by little so you reap success. This publish isn't just for Xiaomi Users who address USB Driver, but any person who wants to installation "Unsigned Drivers" then you may do that way to easy your way.

Disable Driver Signature Enforcement Pada Windows 7 64-Bit (Permanent)

This normally applies to Windows 8 / 8.1 and 10, so you can do that if you are the use of the Windows Operating System. You want to recognise this manner is everlasting, however! However you can disable this Mode after you have got finished installing Xiaomi Android USB Driver.

  • In Windows 7, 8 / 8.1 or 10, open the "Command Prompt" window with Administrator mode. Find the Command Prompt app on the "Application Menu" by means of typing "CMD" or "Command Prompt", so the software will seem, then Right Click on the software and pick "Run As Administrator".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • After the Command Prompt software window opens, now kind the command: 
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

(Make sure the outcomes from it you locate the fulfillment message as inside the photograph above)
  • Then to show at the Mode, then type the command: 
bcdedit.exe -set TESTSIGNING ON
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

(Make sure the outcomes from it you locate the fulfillment message as inside the photograph above)
  • Now do a "Restart" in your computer to start the Enabled Mode. Test Mode that has been lively might be marked through the writing on the lowest right aspect of your pc Desktop display screen.
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • Once the whole thing is going for walks easily, then now you could deploy Xiaomi Android USB Driver to your pc.
  • If you have got finished until you've got flashing your Android Xiaomi device to crowning glory, you can disable the mode you activated, because it works to clear out depended on Drivers in Windows System, for protection reasons.
  • How to disable it is not a good deal different from a way to enable, by using opening "Command Prompt" with Administrator mode.
  • After the Command Prompt software window opens, now kind the command: 
bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS
  • Then to disable it, then type the command: 
bcdedit.exe -set TESTSIGNING OFF
  • Now do a "Restart" in your pc to begin the disabled Mode. And make sure that the Test Mode on the Right aspect Under your Computer computing device screen is gone.

Disable Driver Signature Enforcement In Windows 7 64-Bit (Temporary)

This way the aim is similar to the above noted that has been mentioned, namely to Disable Driver Signature Enforcement In Windows 7, but this is not a way you may do also on different Windows Operating System. This is precise to Windows 7 and is temporary, meaning it's going to disappear after you restart your laptop with out getting into a command into the Command Prompt utility.

This is quite simple and I endorse which you follow this way if you want Signature Enforcement to exchange off briefly.

  • At Windows Booting, press the "F8" key successively until exit mode "Advanced Boot Options".
  • After that, choose "Disable Driver Signature Enforcement" using the "Down Arrow" Button, then press "Enter" key.
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit


Disable Driver Signature Enforcement In Windows 8 / 8.1 and 10 64-Bit (Permanent)

As I said inside the above article, this is usually the way Disable Driver Signature Enforcement In Windows 7 (Permanent) also can be done on Windows 8 / 8.1 and 10. So you may observe the manner or way with a purpose to be discussed mainly for Windows 8 / 8.1 and 10 of those, it is up to you.
  • To completely Disable Driver Signature Enforcement in Windows 8 / 8.1 and 10, you furthermore mght need the "Command Prompt" application that runs with Administrator Mode. To accomplish that look for the utility by means of typing "CMD" or "Command Prompt" to your Windows Application Menu, then after it appears, Right Click on the software and pick "Run As Admnistrator".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • After the Command Prompt window seems, now kind the command: 
bcdedit /set testsigning on
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

(Make sure the outcomes from it you locate the fulfillment message as inside the photograph above)
  • After that, now "Restart" your computer aims to run the Mode you've got enabled. And you may install Xiaomi Android USB Driver to your pc.
  • After the pastime which you have executed in your Xiaomi device is complete, then I advocate to you to disable Mode that has been enabled because this could affect the safety of your Windows System.
  • You can disable the Mode by using the command: 
bcdedit /set testsigning off
  • After that, Restart your pc.

Disable Driver Signature Enforcement In Windows 8 / 8.1 and 10 64-Bit (Temporary)

This is completed for Disable Driver Signature Enforcement on Windows 8 / 8.1 and 10 in temporary time and while not having to go into commands to the Command Prompt utility. This identical manner will use "Advanced Startup Mode" to discover Signature Enforcement.

To do that, there are two methods to go into "Advanced Startup" mode:
Way #1: Log on to Windows 8 / 8.1 Advanced Startup:
  • Press and keep "Windows" button then press "C" key to open "Charm" menu, then pick it and click on "Settings".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • After Menu "Settings" appears, then click on "Change PC Settings".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • Now choose "General" and on "Advanced Startup" click on on "Restart Now" button.
(For Windows 8.1, the "Restart Now" button has moved to "PC Setting -> Update & Recovery -> Recovery.")
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit


Way #2: Log on to Windows 8 / 8.1 Advanced Startup:
The 2nd manner this applies additionally to Windows 10, that is with the aid of doing "Restart" for your laptop while press and keep the "Shift" so that you will be directed to "Advanced Startup" mode.

How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • That way you'll be taken to "Advanced Startup" mode, now choose "Troubleshoot".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • Then click on "Advanced Options".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • After that, click on "Startup Settings".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • Then click at the "Restart" button.
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • After your computer "Restart", it'll routinely be directed to "Startup Settings" mode in which there are several options. To pick "Disable Driver Signature Enforcement" then you could press "7" or "f7".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit


Disable Driver Signature Enforcement In Windows 10 64-Bit

This approach is unique to Windows 10, similar to Windows 8 / 8.1 above while not having to type any command in Command Prompt.

To do that, there are two methods to go into "Advanced Startup" mode:
How to #1: Log into Advanced Windows Startup 10
Press the "Windows" button to deliver up the application menu, then kind "Recovery Options", in the "Advanced Startup" phase click on at the "Restart Now" button.
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit



How to #2: Log into Advanced Windows Startup 10:
This 2nd way applies additionally to Windows 8 / 8.1, this is with the aid of doing "Restart" for your computer even as press and keep "Shift" in order that you'll be redirected to "Advanced Startup" mode.
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • That way you'll be taken to "Advanced Startup" mode, now choose "Troubleshoot".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • Then click on "Advanced Options".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • After that, click on "Startup Settings".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • Then click at the "Restart" button.
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit

  • After your computer "Restart", it'll routinely be directed to "Startup Settings" mode in which there are several options. To pick "Disable Driver Signature Enforcement" then you could press "7" or "f7".
How to Disable Driver Signature Enforcement Windows 7/8/10 64-Bit


Credit Links:


How to Enter EDL Emergency Download Mode Xiaomi Devices

How to Enter EDL (Emergency Download) Mode Xiaomi Devices

EDL (Emergency Download Mode) is the mode required to flashing Stock ROM of Android Xiaomi devices which can be commonly carried out to Xiaomi devices that use Qualcomm Processor.
To enter EDL Mode on Xiaomi device, there are some necessities that you need to do first, remembering because there are numerous ways you can do to get into that mode.

  1. Battery Xiaomi 50% tool (in order not to switch off at some point of the manner).
  2. Enable USB Debugging Mode and OEM Unlocking on Xiaomi device. (to be detected by means of laptop)
  3. Download and install Mi PC Suite and Xiaomi Android USB Driver on your laptop (to connect with pc)
  4. Install ADB & Fastboot at the laptop. (for Xiaomi Device to be controlled through pc)
  5. Provide USB Cable. (as a media liaison between Xiaomi devices and computers)


After you have finished all the essential requirements above, then now you could do the approaches with the intention to be discussed beneath:

Using Buttons On Xiaomi Devices (Hardware)

  • This method at once makes use of the existing button on the Xiaomi device as an try to enter EDL Mode.
  • Now Turn off your Xiaomi device.
  • After that, plug the USB Cable into the pc however no longer on your Xiaomi device.
  • Now press and keep the "Power" and "Volume Up" buttons concurrently, then quickly connect with the USB Cable that you have related to the pc.
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

  • If everything works smoothly, then you will locate the Xiaomi device's LED light will be on, it suggests that your Xiaomi tool is in EDL Mode. You should additionally recognise that when the LED Light is on, the device display screen isn't always on.
  • But in case you do now not locate success via doing the above, then you may do it by following the way under.

Using the ADB Tool


Previously, make certain you've got set up ADB & Fastboot Tool and established Mi PC Suite or USB Driver Xiaomi. If you have already executed so, then you can follow the subsequent steps:

  • If you have got set up USB Driver Xiaomi, however your Xiaomi tool nevertheless cannot connect to your pc then you definitely need to do "Disable Driver Signature Enforcement" on Windows working gadget you use.
  • Make certain now you can join your Xiaomi device along with your laptop the usage of USB Cable.
  • Now, within the ADB folder (C: adb) press and preserve down the "Shift" key and right click, and choose "Open Command Window Here", then the Command Prompt window will pop up, or through entering the "cmd" command to Link Bar "Window Explore".
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

  • Make certain you correctly open Command Prompt in ADB & Fastboot Folder, after that type command: adb devices
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

(The above command is useful to realize whether your device is attached to the computer or not)
  • If you locate the Serial Number as within the image above, then you may continue to the next step, but in case you get the message "Waiting Device" then there's a problem you ought to clear up first, this is Driver problem or "Disable Driver Signature Enforcement" on your computer .
  • Make positive there actually Serial Number is displayed after you type the command "adb devices", if it works then now type the command: adb reboot edl
  • Now you'll discover your Xiaomi device in EDL Mode marked via a lighted LED with the Dead Screen.
  • But in case you do now not locate success via doing the above, then you may do it by following the way under.

Using the Fastboot Tool


Previously, make certain you've got set up ADB & Fastboot Tool and established Mi PC Suite or USB Driver Xiaomi. If you have already executed so, then you can follow the subsequent steps:
If you have got set up USB Driver Xiaomi, however your Xiaomi tool nevertheless cannot connect to your pc then you definitely need to do "Disable Driver Signature Enforcement" on Windows working gadget you use.

How to Enter EDL Mode using Fastboot has 2 Methods:
1. The First Way
  • Make positive your Xiaomi device is Off, then press and hold down the "Volume Down" and "Power" buttons simultaneously to Enter the Fastboot Mode of Xiaomi Device.
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

  • Make certain now you can join your Xiaomi device along with your laptop the usage of USB Cable.
  • Now, within the ADB folder (C:adb) press and preserve down the "Shift" key and right click, and choose "Open Command Window Here", then the Command Prompt window will pop up, or through entering the "cmd" command to Link Bar "Window Explore".
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

  • Make certain you correctly open Command Prompt in ADB & Fastboot Folder, then kind the command: fastboot devices

How to Enter EDL (Emergency Download) Mode Xiaomi Devices

(The above command is useful to realize whether your device is attached to the computer or not)
  • Make positive there actually Serial Number is displayed after you type the command "fastboot devices", if it works then now type the command: fastboot oem edl
  • Now you'll discover your Xiaomi device in EDL Mode marked via a lighted LED with the Dead Screen.
  • But in case you do now not locate success via doing the above, then you may do it by following the way under.


2. The Second Way

This second manner is sort of the same as the primary manner above because each use Fastboot, but this manner has its personal Trick.

  • Make positive your Xiaomi device is Off, then press and hold down the "Volume Down" and "Power" buttons simultaneously to Enter the Fastboot Mode of Xiaomi Device.
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

  • Make certain now you can join your Xiaomi device along with your laptop the usage of USB Cable.
  • Now, within the ADB folder (C:adb) press and preserve down the "Shift" key and right click, and choose "Open Command Window Here", then the Command Prompt window will pop up, or through entering the "cmd" command to Link Bar "Window Explore".
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

  • Make certain you correctly open Command Prompt in ADB & Fastboot Folder, then kind the command: fastboot devices
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

(The above command is useful to realize whether your device is attached to the computer or not)
  • Make sure there truly Serial Number is displayed once you type "fastboot devices" command, if it be triumphant then now type command: fastboot reboot (before urgent "Enter", on your Xiaomi tool, press and hold "Volume Down" and "Volume Up" simultaneously, then press "Enter" to your pc)
  • Now you'll discover your Xiaomi device in EDL Mode marked via a lighted LED with the Dead Screen.
  • But in case you do now not locate success via doing the above, then you may do it by following the way under.

Using Fastboot EDL (Special Tool)


This closing way is usually used to enter EDL Mode Xiaomi Redmi Note 3 Pro, I do now not recognize if this works for other Xiaomi gadgets, however you have the right to try in case you need to recognize the result, because this manner will not negatively impact Xiaomi tool you.
Previously make sure you have hooked up ADB & Fastboot Tool and established Mi PC Suite or USB Driver Xiaomi. If after installing USB Driver Xiaomi however your Xiaomi tool still can't hook up with your laptop then you want to do "Disable Driver Signature Enforcement" on Windows working gadget you use.

  • Make positive your Xiaomi device is Off, then press and hold down the "Volume Down" and "Power" buttons simultaneously to Enter the Fastboot Mode of Xiaomi Device.
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

  • Make certain now you can join your Xiaomi device along with your laptop the usage of USB Cable.
  • Now Download and extract "fastboot_edl.7z" on your computer. And within the "fastboot_edl" folder now press and hold "Shift" then right click and pick "Open Command Window Here", then Command Prompt window will appear, or by coming into "cmd" command to Link Bar in "Window Explore" .
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

  • Make certain you correctly open Command Prompt in ADB & Fastboot Folder, then kind the command: fastboot devices
How to Enter EDL (Emergency Download) Mode Xiaomi Devices

(The above command is useful to realize whether your device is attached to the computer or not)
  • Make sure there simply Serial Number is displayed when you kind "fastboot devices" command, if it be triumphant then now double click on on report "edl.bat" in folder "fastboot_edl". But if this automated manner does now not paintings, then you can kind the command manually in Command Prompt which continues to be open with the command: fastboot_edl.exe reboot-edl
  • Now you'll discover your Xiaomi device in EDL Mode marked via a lighted LED with the Dead Screen.


If this closing way does now not paintings on your Xiaomi device, then I haven't any other way to offer it to you. But hopefully in one of the ways to Enter EDI Mode Xiaomi above can work to your device.
This is all I can write in this put up, may be beneficial for you and hopefully your day is fun.