Some time in the past I once wrote a submit approximately the way to Install Xiaomi Android USB Driver, however there's a problem with the Driver on Windows 7/8/10 64-Bit so should use a unique manner to do the set up in order that Xiaomi device may be detected in EDL or Fastboot Mode. Caused because Driver from Xiaomi is Unsigned. (Read also: How to Enter EDL (Emergency Download) Mode Xiaomi Devices)
In this post I created a "Disable Driver Signature Enforcement" for Xiaomi Android USB Driver installation on Windows 7, 8 / 8.1, and 10 and helped Xiaomi customers to Flashing their Xiaomi devices. Do it little by little so you reap success. This publish isn't just for Xiaomi Users who address USB Driver, but any person who wants to installation "Unsigned Drivers" then you may do that way to easy your way.
Disable Driver Signature Enforcement Pada Windows 7 64-Bit (Permanent)
This normally applies to Windows 8 / 8.1 and 10, so you can do that if you are the use of the Windows Operating System. You want to recognise this manner is everlasting, however! However you can disable this Mode after you have got finished installing Xiaomi Android USB Driver.
- In Windows 7, 8 / 8.1 or 10, open the "Command Prompt" window with Administrator mode. Find the Command Prompt app on the "Application Menu" by means of typing "CMD" or "Command Prompt", so the software will seem, then Right Click on the software and pick "Run As Administrator".
- After the Command Prompt software window opens, now kind the command:
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
- Then to show at the Mode, then type the command:
bcdedit.exe -set TESTSIGNING ON
- Now do a "Restart" in your computer to start the Enabled Mode. Test Mode that has been lively might be marked through the writing on the lowest right aspect of your pc Desktop display screen.
- Once the whole thing is going for walks easily, then now you could deploy Xiaomi Android USB Driver to your pc.
- If you have got finished until you've got flashing your Android Xiaomi device to crowning glory, you can disable the mode you activated, because it works to clear out depended on Drivers in Windows System, for protection reasons.
- How to disable it is not a good deal different from a way to enable, by using opening "Command Prompt" with Administrator mode.
- After the Command Prompt software window opens, now kind the command:
bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS
- Then to disable it, then type the command:
bcdedit.exe -set TESTSIGNING OFF
- Now do a "Restart" in your pc to begin the disabled Mode. And make sure that the Test Mode on the Right aspect Under your Computer computing device screen is gone.
Disable Driver Signature Enforcement In Windows 7 64-Bit (Temporary)
This way the aim is similar to the above noted that has been mentioned, namely to Disable Driver Signature Enforcement In Windows 7, but this is not a way you may do also on different Windows Operating System. This is precise to Windows 7 and is temporary, meaning it's going to disappear after you restart your laptop with out getting into a command into the Command Prompt utility.
This is quite simple and I endorse which you follow this way if you want Signature Enforcement to exchange off briefly.
- At Windows Booting, press the "F8" key successively until exit mode "Advanced Boot Options".
- After that, choose "Disable Driver Signature Enforcement" using the "Down Arrow" Button, then press "Enter" key.
- After the Windows Operating System activates, then you may deploy Xiaomi Android USB Driver to your pc.
Disable Driver Signature Enforcement In Windows 8 / 8.1 and 10 64-Bit (Permanent)
As I said inside the above article, this is usually the way Disable Driver Signature Enforcement In Windows 7 (Permanent) also can be done on Windows 8 / 8.1 and 10. So you may observe the manner or way with a purpose to be discussed mainly for Windows 8 / 8.1 and 10 of those, it is up to you.
- To completely Disable Driver Signature Enforcement in Windows 8 / 8.1 and 10, you furthermore mght need the "Command Prompt" application that runs with Administrator Mode. To accomplish that look for the utility by means of typing "CMD" or "Command Prompt" to your Windows Application Menu, then after it appears, Right Click on the software and pick "Run As Admnistrator".
- After the Command Prompt window seems, now kind the command:
bcdedit /set testsigning on
- After that, now "Restart" your computer aims to run the Mode you've got enabled. And you may install Xiaomi Android USB Driver to your pc.
- After the pastime which you have executed in your Xiaomi device is complete, then I advocate to you to disable Mode that has been enabled because this could affect the safety of your Windows System.
- You can disable the Mode by using the command:
bcdedit /set testsigning off
- After that, Restart your pc.
Disable Driver Signature Enforcement In Windows 8 / 8.1 and 10 64-Bit (Temporary)
This is completed for Disable Driver Signature Enforcement on Windows 8 / 8.1 and 10 in temporary time and while not having to go into commands to the Command Prompt utility. This identical manner will use "Advanced Startup Mode" to discover Signature Enforcement.
Way #1: Log on to Windows 8 / 8.1 Advanced Startup:
- Press and keep "Windows" button then press "C" key to open "Charm" menu, then pick it and click on "Settings".
- After Menu "Settings" appears, then click on "Change PC Settings".
- Now choose "General" and on "Advanced Startup" click on on "Restart Now" button.
(For Windows 8.1, the "Restart Now" button has moved to "PC Setting -> Update & Recovery -> Recovery.")
The 2nd manner this applies additionally to Windows 10, that is with the aid of doing "Restart" for your laptop while press and keep the "Shift" so that you will be directed to "Advanced Startup" mode.
- That way you'll be taken to "Advanced Startup" mode, now choose "Troubleshoot".
- Then click on "Advanced Options".
- After that, click on "Startup Settings".
- Then click at the "Restart" button.
- After your computer "Restart", it'll routinely be directed to "Startup Settings" mode in which there are several options. To pick "Disable Driver Signature Enforcement" then you could press "7" or "f7".
- After that, you may deploy Xiaomi Android USB Driver or "Drivers Unsigned" to your pc.
Disable Driver Signature Enforcement In Windows 10 64-Bit
This approach is unique to Windows 10, similar to Windows 8 / 8.1 above while not having to type any command in Command Prompt.
To do that, there are two methods to go into "Advanced Startup" mode:
How to #1: Log into Advanced Windows Startup 10
Press the "Windows" button to deliver up the application menu, then kind "Recovery Options", in the "Advanced Startup" phase click on at the "Restart Now" button.
How to #2: Log into Advanced Windows Startup 10:
This 2nd way applies additionally to Windows 8 / 8.1, this is with the aid of doing "Restart" for your computer even as press and keep "Shift" in order that you'll be redirected to "Advanced Startup" mode.
- That way you'll be taken to "Advanced Startup" mode, now choose "Troubleshoot".
- Then click on "Advanced Options".
- After that, click on "Startup Settings".
- Then click at the "Restart" button.
- After your computer "Restart", it'll routinely be directed to "Startup Settings" mode in which there are several options. To pick "Disable Driver Signature Enforcement" then you could press "7" or "f7".
- After that, you may deploy Xiaomi Android USB Driver or "Drivers Unsigned" to your pc.
Credit Links:
